IL2

www.vishay.com

Vishay Semiconductors

Rev. 1.7, 15-Apr-2021

1

Document Number: 83612

For technical questions, contact: optocoupler.answers@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Optocoupler, Phototransistor Output, With Base Connection

LINKS TO ADDITIONAL RESOURCES

DESCRIPTION

The IL2 is an optically coupled isolated pairs employing

GaAs infrared LEDs and silicon NPN phototransistor. Signal

information, including a DC level, can be transmitted by the

drive while maintaining a high degree of electrical isolation

between input and output.

The IL2 is especially designed

for driving medium-speed logic and can be used to eliminate

troublesome ground loop and noise problems. This coupler

can be used also to replace relays and transformers in many

digital interface applications such as CRT modulation.

FEATURES

• Current transfer ratio (see order information)

• Isolation test voltage 4420 VRMS

• Material categorization:

for definitions of compliance please see

www.vishay.com/doc?99912

AGENCY APPROVALS

• UL / cUL 1577

• CSA

• CQC GB4943.1-2011

• CQC GB8898-2011

• FIMKO

Note

• Additional options may be possible, please contact sales office

1

2

3

6

5

4

B

C

E

A

C

NC

i179005

Related

Documents

ORDERING INFORMATION

I

L

2

-

X

009

T

PART NUMBER

PACKAGE OPTION

PACKAGE

OPTION

AGENCY CERTIFIED / PACKAGE

CTR (%)

UL, cUL, CSA, CQC, FIMKO

> 100

SMD-6, option 9

IL2-X009T

ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified)

PARAMETER

TEST CONDITION

SYMBOL

VALUE

UNIT

INPUT

Reverse voltage

VR

6V

Forward current

IF

60

mA

Surge current

IFSM

2.5

A

Power dissipation

Pdiss

100

mW

Derate linearly from 25 °C

1.33

mW/°C

> 0.1 mm

Option 9