| データシートサーチシステム |
|
MCP2030-I/ST データシート(PDF) 1 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2030-I/ST データシート(HTML) 1 Page - Microchip Technology |
|
1 / 66 page ![]() © 2005 Microchip Technology Inc. DS21981A-page 1 MCP2030 Device Features: • Three input pins for analog input signals • High input detection sensitivity (3 mVPP, typical) • High modulation depth sensitivity (as low as 8%) • Three output selections: - Demodulated data - Carrier clock - RSSI • Input carrier frequency: 125 kHz, typical • Input data rate: 10 Kbps, maximum • 8 internal Configuration registers • Bidirectional transponder communication (LF talk back) • Programmable antenna tuning capacitance (up to 63 pF, 1 pF/step) • Programmable output enable filter • Low standby current: 4 μA (with 3 channels enabled), typical • Low operating current: 13 μA (with 3 channels enabled), typical • Serial Peripheral Interface (SPI™) with external devices • Supports Battery Back-Up mode and batteryless operation with external circuits • Industrial and Extended Temperature Range: -40°C to +85°C (industrial) Typical Applications: • Automotive industry applications: - Passive Keyless Entry (PKE) transponder - Remote door locks and gate openers - Engine immobilizer - LF initiator sensor for tire pressure monitoring systems • Security Industry applications: - Long range access control transponder - Parking lot entry transponder - Hands-free apartment door access - Asset control and management Description: The MCP2030 is a stand-alone Analog Front-End (AFE) device for Low-Frequency (LF) sensing and bidi- rectional communication applications. The device has eight internal Configuration registers which are readable and programmable, except the read-only STATUS register, by an external device. The device has three low-frequency input channels. Each input channel can be individually enabled or dis- abled. The device can detect an input signal with ampli- tude as low as ~1 mVPP and can demodulate an amplitude-modulated input signal with as low as 8% modulation depth. The device can also transmit data by clamping and unclamping the input LC antenna voltage. The device can output demodulated data, carrier clock or RSSI current depending on the register setting. The demodulated data and carrier clock outputs are avail- able on the LFDATA pin, while the RSSI output is avail- able on the RSSI pin. The RSSI current output is linearly proportional to the input signal strength. The device has programmable internal tuning capaci- tors for each input channel. The user can program these capacitors up to 63 pF, 1 pF per step. These internal tuning capacitors can be used effectively for fine-tuning of the external LC resonant circuit. The device is optimized for very low current consump- tion and has various battery-saving low-power modes (Sleep, Standby, Active). The device can also be oper- ated in Battery Back-up and Batteryless modes using a few external components. This device is available in 14-pin PDIP, SOIC, and TSSOP packages. This device is also used as the AFE in the PIC16F639. Package Types: 1 2 3 4 5 6 7 14 13 12 9 11 10 8 NC LCCOM LCX VSS LFDATA/ VDD LCZ LCY VSS CS SCLK/ALERT RSSI NC VDD CCLK/SDIO MCP2030 PDIP, SOIC, TSSOP Three-Channel Analog Front-End Device |
同様の部品番号 - MCP2030-I/ST |
|
同様の説明 - MCP2030-I/ST |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |