STPM066S datasheet(35/67 Pages) STMICROELECTRONICS

部品番号	STPM066S

部品情報	Power management for automotive vision and radar systems

PDF	67 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

35 / 67 page

5.2.8

SPI REG Fault Table PWUP

Address

0x12

XX_POWERUP_FAULT: 1: means Power-on failed

0: means Power-on succeeded or regulator disabled by OTP

REC_CNT: the counter of times that FSM into REC; will be cleared in STANDBY. If inf_retrail_en=1, REC_CNT is

always 0.

PLL_LOCK_STATUS: this bit is reporting the internal PLL locking status. When "1", the output frequency of the PLL is locked

and stable. When "0", the PLL is not yet stable or off.

WD_FAIL: watchdog fail flag, read and clear; Include normal WDI WD or SPI WD.

0: no fail

1: fail

ABIST_ERR: ABist fail flag, read only.

0: no fail

1: fail

SAF_CRC_FAILED: read only.

0: no fail

1: fail

LBIST_ERR: read only.

0: no fail

1: fail

5.2.9

SPI REG ADC TH1

RESERVED

ADC_TH1

Address

0x13

ADC_TH1: ADC bits output for TH1 cluster (VREG); read only

STPM066S

SPI registers mapping

DS12976 - Rev 2

page 35/67

STPM066S データシート(PDF) 35 Page - STMicroelectronics