10

ATR0786

4587B–SIGE–02/03

Recommended Package Footprint

Notes: 1. Only ground signal traces are allowed directly under the package

2. Primary dimensions are in millimeter alternate dimensions are in inches

Remark: Heatslug must be soldered to GND!

Plugging of the ground vias under the heat slug is also recommended to avoid soldering problems.

3.0

3.0

0.25

1.25

6.9

0.74

0.74

0.7

0.9

0.4

f0.33 via

- Indicates metalization

- vias connect pad to underlying ground plane

all units are in mm