ZOPT2202 Datasheet

© 2016 Integrated Device Technology, Inc

30

September 21, 2016

3.10.8 UVB_DATA

Address

10HEX and 11HEX and 12HEX

Default value

00HEX and 00HEX and 00HEX

Register access

R

Bit

7

6

5

4

3

2

1

0

10HEX

UVB_DATA_0[7:0]

11HEX

UVB_DATA_1[15:8]

12HEX

0

0

0

0

UVB_DATA_2[19:16]

UVB channel digital output data (unsigned integer, 13 to 20 bit, LSB aligned).

Applied temperature and stray light compensation depends on operation mode. See section 3.4 for details.

When an I²C read operation is active and points to an address in the range 07HEX to 18HEX, all registers in this range are

locked until the I²C read operation is completed or this address range is left.

This guarantees that the data in the registers belongs to the same measurement cycle. New measurement data is

stored into temporary registers and the actual *_DATA registers are updated as soon as there is no on-going I²C read

operation in the address range 07HEX to 18HEX.

Register 10HEX

Bit[7:0]

UVB diode data least significant data byte

Register 11HEX

Bit[7:0]

UVB diode data intervening data byte

Register 12HEX

Bit[3:0]

UVB diode data most significant data byte