General Description

Features

ICS91305

0092H—12/02/08

Block Diagram

High Performance Communication Buffer

Pin Configuration

•

Zero input - output delay

•

Frequency range 10 - 133 MHz (3.3V)

•

5V tolerant input REF

•

High loop filter bandwidth ideal for Spread

Spectrum applications.

•

Less than 200 ps Jitter between outputs

•

Skew controlled outputs

•

Skew less than 250 ps between outputs

•

Available in 8 pin 150 mil SOIC & 173 mil

TSSOP packages

•

3.3V ±10% operation

The ICS91305 is a high performance, low skew, low jitter

clock driver. It uses a phase lock loop (PLL) technology

to align, in both phase and frequency, the REF input with

the CLKOUT signal. It is designed to distribute high speed

clocks in communication systems operating at speeds

from 10 to 133 MHz.

ICS91305 is a zero delay buffer that provides

synchronization between the input and output. The

synchronization is established via CLKOUT feed back to

the input of the PLL. Since the skew between the input and

output is less than +/- 350 pS, the part acts as a zero delay

buffer.

The ICS91305 comes in an eight pin 150 mil SOIC

package. It has five output clocks. In the absence of REF

input, will be in the power down mode. In this mode, the

PLL is turned off and the output buffers are pulled low.

Power down mode provides the lowest power consumption

for a standby condition.

8 pin SOIC & TSSOP

REF

CLK2

CLK1

GND

CLKOUT

CLK4

VDD

CLK3

1

2

3

4

8

7

6

5