Datasheet of CS3E Series Stepper Drive

www.leadshine.com

1

CS3E Series Stepper Drive

The newly released CS3E series drives support CANopen over EtherCAT (CoE) control and CiA 402 operating

modes including Profile Position (PP), Profile Velocity (PV), Homing (HM) and Cyclic Synchronous Position (CSP).

The products can be matched with many brands of EtherCAT controller/PLC such as Beckhoff, Omron, Trio,

Keneyce etc.

The CS3E series is highly reliable and affordable and performs excellently in many industrial applications such as

solar equipment, textile, civil, robotics, power generation equipment, 3C, packaging...

Feature

 No loss of step, No hunting, No torque reservation

 CANopen over EtherCAT (CoE) with full support of CiA402,100Mbps full-duplex.

 Support operation modes: Profile Position, Profile Velocity, Cyclic Synchronous Position, Homing

 7 configurable digital inputs, 7 optically isolated digital outputs include brake output

 Low noise and vibration, smooth motion

 20-50VDC supply voltage for CS3E-D503 and CS3E-D507, max 7A output current

20-72VDC supply voltage for CS3E-D728, max 8A output current

20-80VAC or 30-100VDC supply voltage for CS3E-D1008, max 8A output current

 USB port for parameters configuration

 Encoder resolution: 1000 / 2500 / 5000 line for NEMA11/17/23/24/ 34 CS motors,

 Two 7-segment display velocity or slave ID or operation mode or error code

 Protections for over voltage, over current and position following error, encoder cable error, etc.