 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TSL25713FN データシート(PDF) 28 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TSL25713FN データシート(HTML) 28 Page - OSRAM GmbH |
|
|
28 / 39 page  ams Datasheet Page 27 [v1-01] 2018-Mar-27 Document Feedback TSL2571 − Application Information Hardware Typical Hardware Application A typical hardware application circuit is shown in Figure 32. A 1- μF low-ESR decoupling capacitor should be placed as close as possible to the VDD pin. Figure 32: Typical Application Hardware Circuit VBUS in Figure 32 refers to the I²C bus voltage, which is either VDD or 1.8 V. Be sure to apply the specified I²C bus voltage shown in the Available Options table for the specific device being used. The I²C signals and the Interrupt are open-drain outputs and require pull-up resistors. The pull-up resistor (RP) value is a function of the I²C bus speed, the I²C bus voltage, and the capacitive load. The ams EVM running at 400 kbps, uses 1.5-k Ω resistors. A 10-k Ω pull-up resistor (RPI) can be used for the interrupt line. Application Information Hardware TSL2571 INT SDA SCL VDD 1 mF GND VBUS RP RP RPI VDD |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
