 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
TSL26711FN データシート(PDF) 28 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TSL26711FN データシート(HTML) 28 Page - OSRAM GmbH |
|
|
28 / 45 page  ams Datasheet Page 27 [v1-00] 2016-Jul-12 Document Feedback TSL2671 − Register Description Configuration Register (0x0D) The configuration register sets the wait long time. Figure 31: Configuration Register Proximity Pulse Count Register (0x0E) The proximity pulse count register sets the number of proximity pulses that will be transmitted. PPULSE defines the number of pulses to be transmitted at a 62.5-kHz rate. While the value can be programmed up to 255 pulses, the practical limit of the device is 32 pulses. It is recommended that 32 or fewer pulses be used to achieve maximum signal-to-noise ratio. Figure 32: Proximity Pulse Count Register Field Bits Description Reserved 7:2 Reserved. Write as 0. WLONG 1 Wait Long. When asserted, the wait cycles are increased by a factor 12X from that programmed in the WTIME register. Reserved 0 Reserved. Write as 0. Field Bits Description PPULSE 7:0 Proximity Pulse Count. Specifies the number of proximity pulses to be generated. 6 75 4 2 31 0 CONFIG Reserved WLONG Address 0x0D Reserved 6 75 4 2 31 0 PPULSE PPULSE Address 0x0E |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
