MPC885ZP133 datasheet(89/92 Pages) FREESCALE

89 / 92 page

MPC885/MPC880 Hardware Specifications, Rev. 3

Freescale Semiconductor

Document Revision History

17 Document Revision History

Table 40 lists significant changes between revisions of this hardware specification.

Table 40. Document Revision History

Revision

Number

Date

Changes

02/2003

Initial revision.

0.1

04/2003

Added pinout and pinout assignments table. Added the USB timing to Section 14. Added

the Reduced MII to Section 15. Removed the Data Parity. Made some changes to the

Features list.

0.2

05/2003

Made the changes to the RMII Timing, Made sure all the VDDL, VDDH, and GND show up

on the pinout diagram. Changed the SPI Master Timing Specs. 162 and 164.

0.3

05/2003

Corrected the signals that had overlines on them.

0.4

5/2003

Changed the pin descriptions for PD8 and PD9.

0.5

5/2003

Changed some more typos, put in the phsel and phreq pins. Corrected the USB timing.

0.6

6/2003

Changed the pin descriptions per the June 22 spec.

0.7

7/2003

Added the RxClav and TxClav signals to PC15.

0.8

8/2003

Added the Reference to USB 2.0 to the Features list and removed 1.1 from USB on the

block diagrams.

0.9

8/2003

Changed the USB description to full-/low-speed compatible.

1.0

9/2003

Added the DSP information in the Features list

Fixed table formatting.

Nontechnical edits.

Released to the external web.

2.0

12/2003

Changed the maximum operating frequency to 133 MHz.

Put in the orderable part numbers that are orderable.

Put the timing in the 80 MHz column.

Rounded the timings to hundredths in the 80 MHz column.

Put the pin numbers in footnotes by the maximum currents in Table 6.

Changed 22 and 41 in the Timing.

Put in the Thermal numbers.

3.0

7/22/2004

• Added sentence to Spec B1A about EXTCLK and CLKOUT being in Alignment for

Integer Values

• Added a footnote to Spec 41 specifying that EDM = 1

• Added RMII1_EN under M1II_EN in Table 36 Pin Assignments

• Added a tablefootnote to Table 6 DC Electrical Specifications about meeting the VIL

Max of the I2C Standard

• Put the new part numbers in the Ordering Information Section

MPC885ZP133 データシート(PDF) 89 Page - Freescale Semiconductor, Inc

MPC885ZP133 データシート(HTML) 89 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

データシートダウンロード