- 20-

3.3 AC Wiring

We recommend using 10 to 8 AWG wire to connect to the ac terminal block.

When in AC mode the AC input power will supply both the loads and AC charger, a thicker wire gauge for

AC Input is required. Consult a qualified electrician about the specific wire gauge required in terms of wire

material and inverter power.

There are 3 different ways of connecting to the terminal block depending on the model. All the wirings are

CE compliant, call our tech support if you are not sure about how to wire any part of your inverter.

Single-Phase Wiring Mode

230Vac or 120Vac

Input: Hot line+Neutral+Ground

Output: Hot line+Neutral+Ground

Dual-Phase Wiring Mode

240Vac split phase

Input: Hot line+ Hot line +Ground

Output: Hot line+ Hot line +Neutral