| データシートサーチシステム |
|
HT45RM03 データシート(PDF) 32 Page - Holtek Semiconductor Inc |
|
|
|||||||||||||||||||||||||||||
HT45RM03 データシート(HTML) 32 Page - Holtek Semiconductor Inc |
|
32 / 54 page ![]() HT45RM03 Rev. 1.10 32 February 16, 2007 Options No. Options 1 OSC type selection. This option is to decide if an RC or crystal oscillator is chosen as system clock. 2 WDT source selection. There are three types of selection: on-chip RC oscillator, instruction clock or disable the WDT. 3 CLRWDT times selection. This option defines how to clear the WDT by instruction. ²One time² means that the CLR WDT instruction can clear the WDT. ²Two times² means only if both of the CLR WDT1 and CLR WDT2 instructions have been exe- cuted, then WDT can be cleared. 4 Wake-up selection. This option defines the wake-up function activity. External I/O pins (PA only) all have the capability to wake-up the chip from a HALT. 5 Pull-high selection. This option is to decide whether a pull-high resistance is visible or not in the input mode of the I/O ports. PA0~PA7, PB0~PB7, can be independently selected. 6 PFD selection: PD0: level output or PFD output 7 Low voltage reset selection: Enable or disable LVR function, and LVR voltage selection. 8 PWM mode selection: 10 (9+1), (8+2) or (7+3) mode 9 INT0A, INT0B, INT0C and INT1 trigger edge: disable; high to low; low to high or low to high or high to low. 10 PWM output level selection; PWMLEV. This option is to determine the PWM output level. Active Low or Active High selection. Disable this bit to ²0², the PWM output will be defined as an active high output, Enable this bit to ²1², the PWM output will be defined as an active low output. If the PWM function disable, this bit is invalid. 11 PWM Complementary output level selection; PWMCLEV. This option is to determine the PWM Complementary output level. Active low or active high selection. Disable this bit to ²0², the PWM Complementary output will be defined as an active high output, Enable this bit to ²1², the PWM Complementary output will be defined as an active low output. If the PWM Complementary function disable, this bit is invalid. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |