| データシートサーチシステム |
|
SC622AEVB データシート(PDF) 1 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
SC622AEVB データシート(HTML) 1 Page - Semtech Corporation |
|
1 / 23 page ![]() POWER MANAGEMENT 1 SC622A LED Light Management Unit Charge Pump, 400mA Flash LED, Dual LDOs, and I2C Interface © 2007 Semtech Corporation Features Input supply voltage range — 3.0V to 5.5V Charge pump modes — 1x, 1.5x and 2x Flash LED — 400mA max in flash mode, 250mA max continuous for spotlight Two user-configurable 100mA low-noise LDO regulators Charge pump frequency — 250kHz I2C compatible interface — up to 400kHz External flash control pin to sync with camera Optional 1s flash time out Automatic sleep mode (flash off ) — I Q = 100μA Low shutdown current — 0.1μA (typical) Ultra-thin package — 3mm x 3mm x 0.6mm Fully WEEE and RoHS compliant Applications Cellular phone flash PDA flash Camera I/O and core power Description The SC622A is a high efficiency charge pump LED driver using Semtech’s proprietary mAhXLifeTM technology. Performance is optimized for use in single-cell Li-ion battery applications. The charge pump provides continuous or bursted current to a flash LED using a dedicated flash driver current sink. The load and supply conditions determine whether the charge pump operates in 1x, 1.5x, or 2x mode. A flash- timeout feature disables the flash if active for longer than 1 second. The SC622A also provides two low-dropout, low-noise linear regulators for powering a camera module or other peripheral circuits. The SC622A uses an I2C compatible serial interface. The interface controls all functions of the device, including flash current and two LDO voltage outputs. The flash/ spotlight output is triggered via either the I2C interface or a dedicated pin. In sleep mode, the device reduces quiescent current to 100 μA while continuing to monitor the serial interface. The two LDOs can be enabled when the device is in sleep mode. Total current reduces to 0.1μA in shutdown. SC622A VIN SDA FLEN BYP AGND PGND VOUT FL CIN 2.2μF LDO 1 LDO 2 1 C + C1- C2+ C2- I2C Data Flash Control VLDO1 = 2.5V to 3.3V VLDO2 = 1.5V to 1.8V Enable Control I2C Clock SCL EN VBAT CBYP 22nF C1 2.2μF C2 2.2μF COUT 4.7μF CLDO2 1μF CLDO1 1μF FLASH US Patents: 6,504,422; 6,794,926 Typical Application Circuit July 19, 2007 |
同様の部品番号 - SC622AEVB |
|
同様の説明 - SC622AEVB |
|
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |