The Embedded I/O Company

TIP600

16 Interrupt generating Digital Inputs

Application Information

The TIP600 is an IndustryPack® compatible module and

has 16 digital inputs galvanically isolated by optocoupler.

The individual inputs are potential free in relation to each

other. A high performance input circuit ensures a defined

switching

point

and

polarization

protection

against

confusing the pole.

All inputs have an electronic debounce circuit with a freely

programmable debounce time. All inputs can generate an

interrupt. The signal edge handling is programmable.

For systems with particularly fast reaction, each input can

be assigned its own interrupt vector.

The Software Support TIP600-SW-xx provides functions to

configure the TIP600, read the input status and connect

software events to input state changes.

Technical Information

 Interface according to IndustryPack specification

 Identification-PROM supports auto-configuration

 Single Size IndustryPack

 16 interrupt generating digital inputs

 24V signal voltage for inputs, other voltages on

request

 Optocouplers for galvanic isolation of input to

computer system

 All inputs isolated against each other

 All inputs protected against confusing the pole

 All inputs have an electronic debounce circuit,

debounce time is freely programmable

TEWS TECHNOLOGIES GmbH keeps the right to change technical specification without further notice.

All trademarks mentioned are property of their respective owners.

Issue 1.1.1

2017-08-24

TEWS TECHNOLOGIES GmbH

Am Bahnhof 7

25469 Halstenbek, Germany

Phone: +49 (0) 4101 4058 0

Fax: +49 (0) 4101 4058 19

e-mail: info@tews.com

www.tews.com