607 datasheet(40/60 Pages) ABBATRON

40 / 60 page

High Voltage Insulators

•

Abbatron High Voltage Insulators are ideal for high-voltage,

high-temperature standoff and/or feed-thru applications. They

are not intended for high-vacuum or hermetically sealed use,

nor with heavy shear loads.

•

Temperature ratings recommend Steatite safe operation to

1800oF (980oC). Cushion washers may further limit operating

temperature.

•

Voltage ratings (recommended in table) are specified under

clean, dry conditions only. Moisture and/or dirt will de-rate

up to 50%.

•

Nominal operating current, limited by hardware size, shown

for AC, 60Hz, 10oC rise.

•

These insulators are made from Grade L-5 Steatite per

MIL-I-10E. Hardware is nickel plated brass except for solder

lugs, which are tin plated. Cushion washers are “Champak”,

compressed paper or cork.

Steatite Material Specifications:

•

Water absorption 0.05% maximum

•

2600oC softening temperature

• Coefficient of Expansion 7.5 (In/In. per oC x 10-6)

•

Dialectric strength 250 Volts per mil.

•

.003 power factor at 1MHz

• Clear glaze finish over creamy white colored Steatite material.

PART

VOLT

MIN. DIA.

HEIGHT

SCREW

NO.

RATING

SIZE

9500

3 KV

7/16

5/8

21/32

6-32

9501

4 KV

1/2

3/4

1-1/32

8-32

9502

5 KV

1/2

1-9/16

8-32

9503

10 KV

5/8

1-1/8

2-1/16

10-32

HH Smith

607 データシート(PDF) 40 Page - Abbatron All Rights Reserved

607 データシート(HTML) 40 Page - Abbatron All Rights Reserved

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

データシートダウンロード