22

DF40 Series/0.4mm Pitch, 1.5 to 4.0mm Height, Board-to-Board/FPC-to-Board Connector

Handling Precautions for Connector Insertion

DF40#-#DS-0.4V

DF40#-#DS-0.4V

When aligned in, it should drop one step and become

parallel, and should be mated parallel from the point

where it no longer moves back and forth or side to side.

When aligning, look for the entrances without applying

excessive force. Please note that applying excessive

force may cause broken and shaving of the mold,

which may lead to malfunctions of contact resistance