16

SN74HCS596-Q1

SCLS805 – JUNE 2020

www.ti.com

Product Folder Links: SN74HCS596-Q1

Submit Documentation Feedback

Copyright © 2020, Texas Instruments Incorporated

Typical Application (continued)

–

Input signals to Schmitt-trigger inputs, like those found on the HCS family of devices, can support

unlimited edge rates.

–

Input thresholds are listed in the Electrical Characteristics.

–

Inputs include positive clamp diodes. Input voltages can exceed the device's supply so long as the clamp

current ratings are observed from the Absolute Maximum Ratings. Do not exceed the absolute maximum

voltage rating of the device or it could be damaged.

2. Recommended Output Conditions:

–

Load currents should not exceed the value listed in the Absolute Maximum Ratings.

–

Series resistors on the output may be used if the user desires to slow the output edge signal or limit the

output current.