Tested works with our Feather 32u4, M0 and ESP8266 boards. The OLED uses

only the two I2C pins on the Feather, and you can pretty much stack it with any

other FeatherWing, even ones that use I2C since that is a shared bus. To

use, simply follow our tutorial to install our Arduino library, it's basically

a Feather-shaped version of the 128x32 I2C OLED breakout

TECHNICAL DETAILS



OLED UG-2832HSWEG02 Datasheet https://cdn-

shop.adafruit.com/datasheets/UG-2832HSWEG02.pdf



PCB dimensions: 22.9mm x 50.9mm / 0.9" x 2"



Display area: ~25.8mm / ~1.0"



Weight: 4.8g



On 32u4 or M0 Feathers, buttons A, B & C connect to 9, 6, 5 respectively



On Huzzah ESP8266 Feather, buttons A, B & C connect to 0, 16, 2

respectively