Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

PRODUCT ID: 3153

Description

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix

display for any Feather. This kit combines two of our adorable miniature LED matrices with a

FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big

LED matrix has, but bite sized! Double them up for 128 total bright yellow LEDs.

This is the Yellow Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Combo Pack! We Also

have these combo packs in White, Blue, Green, Red, and Yellow-Green

Normally, wiring up 8x16 matrices would require a breath-taking 24 GPIO pins, which is way

too many pins. That's where this lovely 16x8 LED matrix backpack PCB comes in. It contains a

HT16K33 I2C LED matrix driver that does all the multiplexing work for you, and is controlled

over the two I2C pins. It's easy to use, has a portable library that runs on any of our Feathers

to turn on/off each LED.