o

The M4 momentary type acts like a push button - when the A button is held down, the matching

pin goes high. When the A button is released, the matching pin goes low. The pins only go high

when a button is pressed

o

The T4 toggle type acts like an alternating toggle switch - when the A button is pressed the first

time, the matching pin goes high. When the A button is pressed a second time, the matching pin

goes low. The pins are turned on and off by repeated presses

o

The L4 latch type acts like a selector switch - when the A button is pressed the first time, the

matching pin goes high. When the B button is pressed it turns A's pin off and turns B's pin on.

When C is pressed, it turns B off, etc. Only one is on at a time. If you press the same button twice,

it doesn't turn that pin off.

This product ID is for the Latching L4 type! It only includes the receiver module, you will also need to

pick up a keyfob transmitter



Technical Details

Based on the PT2272 chipset

                                                                      Engineered in NYC Adafruit ®