TFP403

TI

PanelBus™ DIGITAL RECEIVER

SLDS125B − DECEMBER 2000 − REVISED MAY 2011

5

POST OFFICE BOX 655303

• DALLAS, TEXAS 75265

Terminal Functions (Continued)

TERMINAL

I/O

DESCRIPTION

NAME

NO.

I/O

DESCRIPTION

RSVD

42

DO

Reserved. Must be tied high for normal operation

RSVD

92−96

AI

Reserved. See TFP501 data sheet for intended future use.

RxC+

89

AI

Clock positive receiver input—Positive side of reference clock. TMDS low voltage signal differential input pair

RxC−

90

AI

Clock negative receiver input—Negative side of reference clock. TMDS low voltage signal differential input

pair

Rx0+

86

AI

Channel-0 positive receiver input—Positive side of channel-0. TMDS low voltage signal differential input pair.

Channel-0 receives blue pixel data in active display and HSYNC, VSYNC control signals in blank.

Rx0−

87

AI

Channel-0 negative receiver input—Negative side of channel-0. TMDS low voltage signal differential input

pair.

Rx1+

83

AI

Channel-1 positive receiver input—Positive side of channel-1 TMDS low voltage signal differential input pair.

Channel-1 receives green pixel data in active display and CTL1 control signals in blank.

Rx1−

84

AI

Channel-1 negative receiver input—Negative side of channel-1 TMDS low voltage signal differential input pair

Rx2+

80

AI

Channel-2 positive receiver input—Positive side of channel-2 TMDS low voltage signal differential input pair.

Channel-2 receives red pixel data in active display and CTL2 control signals in blank.

Rx2−

81

AI

Channel-2 negative receiver input—Negative side of channel-2 TMDS low voltage signal differential input

pair.

SCDT

8

DO

Sync detect—Output to signal when the link is active or inactive. The link is considered to be active when DE is

actively switching. The TFP403 monitors the state DE to determine link activity. SCDT can be tied externally to

PDO to power down the output drivers when the link is inactive.

High: Active link

Low: Inactive link

ST

3

DI

Output drive strength select—Selects output drive strength for high or low current drive. (See dc specifications

for IOH and IOL vs ST state.)

High : High drive strength

Low : Low drive strength

STAG

7

DI

Staggered pixel select—An active low signal used in the 2-pixel/clock pixel mode (PIXS = high). Time staggers

the even and odd pixel outputs to reduce ground bounce. Normal operation outputs the odd and even pixels

simultaneously.

High : Normal simultaneous even/odd pixel output

Low: Time staggered even/odd pixel output

VSYNC

47

DO

Vertical sync output