HIP2100

FN4022 Rev.16.00

Page 10 of 14

Aug 8, 2019

Revision History

The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to the web to make sure that

you have the latest revision.

DATE

REVISION

CHANGE

Aug 8, 2019

FN4022.16

Added Related Literature

Updated Links throughout.

Updated Ordering Information table by removing retired parts, adding tape and reel information, and adding

Note 3.

Removed all information for DFN package.

Removed About Intersil section.

Updated disclaimer

Updated POD M8.15C to the latest revision changes are as follows:

-Updated Millimeter MIN and MAX values for A from: 1.43 MIN and 1.68 MAX to: 1.422 MIN and 1.700 MAX

-Updated Inch MAX for A from: 0.066 to: 0.067

-A1 Inches changed MIN from: 0.001 to 0.0, and A1 Millimeters MIN from 0.03 to 0.0

-L Millimeter Min changed from: 0.41 to 0.406

Aug 31, 2015

FN4022.15

Updated Ordering Information Table on page 2.

Added Revision History and About Intersil sections.

Updated POD M8.15 from rev 1 to rev 4. Changes since rev 1:

Updated to new format by removing table, moving dimensions onto drawing and adding land pattern

Typical Recommended Land Pattern, changed the following:

2.41(0.095) to 2.20(0.087)

0.76 (0.030) to 0.60(0.023)

0.200 to 5.20(0.205)

Changed Note 1 "1982" to "1994"