TSC2011H datasheet(26/49 Pages) STMICROELECTRONICS

部品番号	TSC2011H

部品情報	High temperature, high voltage, precision, bidirectional current sense amplifiers

PDF	49 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

26 / 49 page

5.3

Unidirectional / bidirectional operation

•

Unidirectional operation

Unidirectional mode of operation allows the device to measure the current through a shunt resistor in one

direction only. The output reference can be ground or Vcc and can be set by using VREF1 and VREF2 pins for

adjustment.

•

Ground referenced

Figure 58. Output reference to ground

In this configuration VREF1 pin and VREF2 pin are connected together to the ground. The output common mode

voltage is then automatically set to GND when no current flows through the Rshunt resistance. This configuration

allows the full scale output in unidirectional mode. It allows a current to be measured as described in Figure 1.

•

Vcc referenced

Figure 59. Output reference to Vcc

In this configuration VREF1 pin and VREF2 pin are connected together to the Vcc power supply. The output

common mode voltage is then automatically set to Vcc voltage when no current flows through the Rshunt

resistance. This configuration allows the full scale output in unidirectional mode. It measures the current as

described in Figure 2.

TSC2010H, TSC2011H, TSC2012H

Application information

DS13791 - Rev 2

page 26/49

TSC2011H データシート(PDF) 26 Page - STMicroelectronics