TDA7563APD datasheet(20/35 Pages) STMICROELECTRONICS

部品番号	TDA7563APD

部品情報	4 x 50 W power amplifier with high efficiency and built-in I2C diagnostic

PDF	35 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

20 / 35 page

Thermal protection

TDA7563A

20/35

DocID14407 Rev 5

Thermal protection

Thermal protection is implemented through thermal foldback (Figure 28).

Thermal foldback begins limiting the audio input to the amplifier stage as the junction

temperatures rise above the normal operating range. This effectively limits the output power

capability of the device thus reducing the temperature to acceptable levels without totally

interrupting the operation of the device.

The output power will decrease to the point at which thermal equilibrium is reached.

Thermal equilibrium will be reached when the reduction in output power reduces the

dissipated power such that the die temperature falls below the thermal foldback threshold.

Should the device cool, the audio level will increase until a new thermal equilibrium is

reached or the amplifier reaches full power. Thermal foldback will reduce the audio output

level in a linear manner.

Three Thermal warnings are available through the I2C bus data.

Figure 28. Thermal foldback diagram

TDA7563APD データシート(PDF) 20 Page - STMicroelectronics