M41TC8025AMC7F datasheet(12/41 Pages) STMICROELECTRONICS

部品番号	M41TC8025AMC7F

部品情報	Highly accurate, temperature-compensated serial real-time clock (RTC) with embedded crystal

PDF	41 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

12 / 41 page

Operation

M41TC8025

12/41

DocID022873 Rev 4

Figure 7. READ mode sequence

Figure 8. Alternative READ mode sequence

2.2.7

WRITE mode

In this mode the master transmitter transmits to the M41TC8025 slave receiver. Bus

protocol is shown in Figure 9 on page 13. Following the START condition and slave

address, a logic '0' (R/W = 0) is placed on the bus and indicates to the addressed device

that word address "An" will follow and is to be written to the on-chip address pointer. The

data word to be written to the memory is strobed in next and the internal address pointer is

incremented to the next address location on the reception of an acknowledge clock. The

M41TC8025 slave receiver will send an acknowledge clock to the master transmitter after it

has received the slave address (see Table 3 on page 11) and again after it has received the

word address and each data byte.

Obsolete

Product(s)

- Obsolete

Product(s)

M41TC8025AMC7F データシート(PDF) 12 Page - STMicroelectronics