SGM809-RXN3 datasheet(3/9 Pages) SGMICRO

3 / 9 page

SGM803/809/810

ABSOLUTE MAXIMUM RATINGS

(Typical values are at TA = 25°C, unless otherwise noted.)

VCC................................................................................–0.3 V to +6 V

RESET,

RESET ...............................................–0.3 V to VCC +0.3 V

Input Current , VCC.................................................................20 mA

Output Current, RESET,

RESET ......................................... 20 mA

Rate of Rise, VCC .................................................................100 V/µs

Power Dissipation, PD @ TA = 25℃

SOT23-3 .....................................................................................0.4W

Package Thermal Resistance

SOT23-3, θJA....................................................................... 250℃/W

Operating Temperature Range...........................- 40°C to +125°C

Junction Temperature...........................................................+150°C

Storage Temperature.............................................- 65°C to +150°C

Lead Temperature (soldering, 10s).....................................+260°C

ESD Susceptibility

HBM..........................................................................................4000V

MM..............................................................................................400V

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress

ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational

sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

PIN DESCRIPTION

Pin Number

NAME

SGM803

SGM809

SGM809-

ZXN3L

SGM810

FUNCTION

GND

Ground

RESET

—

Active Low reset.

RESET remains low while VCC is below the reset

threshold, and remains low for 240 ms (typ) after VCC rises above the

reset threshold.

RESET

—

Active High reset. RESET remains high while VCC is below the reset

threshold, and remains high for 240 ms (typ) after VCC rises above the

reset threshold.

VCC

Power supply voltage that is monitored.

SGM809-RXN3 データシート(PDF) 3 Page - SG Micro Corp

SGM809-RXN3 データシート(HTML) 3 Page - SG Micro Corp

Html Pages

1 2 3 4 5 6 7 8 9

データシートダウンロード