5 of 8
RF2480
Rev A4 DS060329
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Package Drawing
Pin
Function
Description
Interface Schematic
15
Q SIG
Baseband input to the Q mixer. This pin is DC-coupled. Maximum output
power is obtained when the input signal has a peak to peak amplitude of
2V; for highly linear operation, the input signal (and output power) must be
reduced appropriately. The recommended DC level for this pin is 3.0V. The
peak minimum voltage on this pin (V
REF - peak modulation amplitude)
should never drop below 2.0V. The peak maximum voltage on this pin
(V
REF + peak modulation amplitude) should never exceed 4.0 V. See pin 1
for more details.
16
I SIG
Baseband input to the I mixer. This pin is DC-coupled. Maximum output
power is obtained when the input signal has a peak to peak amplitude of
2V; for highly linear operation, the input signal (and output power) must be
reduced appropriately. The recommended DC level for this pin is 3.0V. The
peak minimum voltage on this pin (V
REF - peak modulation amplitude)
should never drop below 2.0V. The peak maximum voltage on this pin
(V
REF + peak modulation amplitude) should never exceed 4.0 V. See pin 1
for more details.
425
Ω
425
Ω
100
Ω
100
Ω
Q REF
Q SIG
425
Ω
425
Ω
100
Ω
100
Ω
I REF
I SIG
NOTES:
1. Shaded lead is Pin 1.
2. All dimensions are excluding
mold flash.
3. Lead coplanarity - 0.005 with
respect to datum "A".
0.050
0.018
0.014
0.157
0.150
0.393
0.386
0.244
0.229
8° MAX
0° MIN
0.034
0.016
0.009
0.007
0.068
0.053
0.008
0.004
-A-
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
