4

My first print

1) Prepare the gcode

2) Prepare the printer

Download the MyFirstPrint.stl on

www.polymaker.com

Load the stl file in your favorite slicer.

- Clean the build plate and prepare it with the right surface:

We recommend to print

PolyLite™ ASA on BuildTak® or using Magigoo.

- Level the build plate.

- It is recommended to clean the nozzle when you change the material to

prevent partial clog.

Note: It is recommended to use an enclosure to print

PolyLite™ ASA to prevent warping issue.

It is recommended to place the printer in a well ventilated area.

Enter the correct settings for PolyLite™ ASA;

Property

Value

Bed temperature

75˚C-95˚C

Cooling fan

OFF

Nozzle speed

30mm/s – 50mm/s

Nozzle temperature

240˚C-260˚C

Layer height

0.1

Number of outlines (shell)

3

Infill

20%

Top/Bottom layers

Surface adhesion

4

Brim or Raft