| データシートサーチシステム |
|
DIA58243SQL14 データシート(PDF) 1 Page - DIOO MICROCIRCUITS CO., LTD |
|
|
|||||||||||||||||||||||||||||
DIA58243SQL14 データシート(HTML) 1 Page - DIOO MICROCIRCUITS CO., LTD |
|
1 / 8 page ![]() DIA58243 Brief, Nov 2025 www.dioo.com © 2025 Dioo Microcircuits Co., Ltd. Jiangsu I Automotive Integrated H-Bridge Driver with SPI Features AEC-Q100 qualified − Device ambient temperature: -40°C ≤ TA ≤ 125°C − Device junction temperature: -40°C ≤ TJ ≤ 150°C 4.5 V to 35 V (40 V abs. max) operating range Maximum output current : 12 A RDS(ON): 84 mΩ (typ) per half bridge Supports 3.3 V, 5 V logic inputs PWM operation up to 25 kHz Very low sleep current, 5.8 μA (max) at 125°C Optimized EMI performance − Spread spectrum clocking (SPI only) − Configurable slew rate Integrated shunt-less current sense Configurable current regulation Complete protection and diagnostic with configurable fault reaction (latched or retry) − Overcurrent protection − Overtemperature protection − Off-state short & open diagnostics − On-state short & open diagnostics (SPI only) − VM overvoltage detection − VM undervoltage detection − Configurable dead time Configurable as H-Bridge or two independent half bridges − Single H-Bridge using PWM or PH/EN mode − Two half-bridges using Independent mode Supports both SPI and HW options Package Information Applications Automotive brushed DC motors and solenoids Zone control unit (ZCU) Hidden door handles Side mirror modules Electric spoiler adjustment Door lock, child lock, tail gate lock E-Shifter Description The DIA58243 is a full bridge motor driver intended for a wide range of automotive applications. The H-bridge consists of four N-channel power MOSFETs and a charge pump regulator which improves efficiency by supporting N-channel MOSFETs with 100% duty cycle driving. An internal current mirror architecture on the IPROPI pin implements current sensing and regulation. This eliminates the need for a low-ohm shunt resistor, saving board area and reducing system cost. The DIA58243 integrates complete diagnostics and protections, including the monitoring of the supply voltage, overtemperature shutdown, overcurrent protection and load diagnostics in both the off-state and on-state to detect open load, and short circuit. Fault conditions are indicated on the nFAULT pin. The SPI interface allows more flexible device configuration and fault observability. Simplified Schematic Part Number Package Body Size DIA58243 QFN3*4.5-14 3.0 mm × 4.5 mm |
同様の部品番号 - DIA58243SQL14 |
|
同様の説明 - DIA58243SQL14 |
|
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |