| データシートサーチシステム |
|
CSA20FBT データシート(PDF) 7 Page - Clarke International |
|
|
|||||||||||||||||||||||||||||
CSA20FBT データシート(HTML) 7 Page - Clarke International |
|
7 / 20 page ![]() 7 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com 12. Connect the hydraulic hose to the ram cylinder, sealing the joint with PTFE tape and tighten using two open ended spanners. 13. The pressure gauge is sealed for transit and it will be necessary to make a small hole in the pressure gauge safety bung with a short pin or nail before use. • Do not use a long nail as you may damage the internal components of the gauge. 14. Bolt the pressure gauge into position on the hydraulic ram. • We recommend sealing the thread with PTFE tape. Take care not to let any oil escape while connecting the hose. 15. Top up the hydraulic oil to the lower level of the filler plug. |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |