データシートサーチシステム
  Japanese  ▼
ALLDATASHEET.JP

X  

AS3689 データシート(PDF) 44 Page - ams-OSRAM AG

部品番号 AS3689
部品情報  Flexible Lighting Management
PDF  72 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
メーカー  AMSOSRAM [ams-OSRAM AG]
ホームページ  https://ams-osram.com/
Logo AMSOSRAM - ams-OSRAM AG

AS3689 データシート(HTML) 44 Page - ams-OSRAM AG

Back Button AS3689 Datasheet HTML 40Page - ams-OSRAM AG AS3689 Datasheet HTML 41Page - ams-OSRAM AG AS3689 Datasheet HTML 42Page - ams-OSRAM AG AS3689 Datasheet HTML 43Page - ams-OSRAM AG AS3689 Datasheet HTML 44Page - ams-OSRAM AG AS3689 Datasheet HTML 45Page - ams-OSRAM AG AS3689 Datasheet HTML 46Page - ams-OSRAM AG AS3689 Datasheet HTML 47Page - ams-OSRAM AG AS3689 Datasheet HTML 48Page - ams-OSRAM AG Next Button
Zoom Inzoom in Zoom Outzoom out
 44 / 72 page
background image
AS3689
austriami crosyst ems
Datasheet, Confidential
www.austriamicrosystems.com (mlg, ptr)
Revision 1.0.2 / 20070115
42 - 70
7.4.8 PWM Generator
The PWM generator can be used for any current sink (CURR1, CURR2, CURR3x, CURR4x, CURR5x, CURR6,
RGBx).. It can be programmed to use the pin GPIO (pwm_mode=0) or an internal PWM generator
(pwm_mode=1). The setting applies for all current sinks, which are controlled by the pwm generator (e.g.
CURR1 is pwm controlled if curr1_mode = 10, RGB1 is pwm controlled if rgb1_mode = 10). The pwm modulated
signal (internal / external) can switch on/off the current sinks and therefore depending on its duty cycle change
the brightness of an attached LED.
7.4.8.1 Internal PWM Generator
The internal PWM generator uses the 2MHz internal clock as input frequency and its dimming range is 6 bits
digital (2MHz / 2^6 = 31.3kHz pwm frequency) and 2 bits analog. Depending on the actual code in the register
‘pwm_code’ the following algorithm is used:
If pwm_code bit 7 = 1
Then the upper 6 bits (Bits 7:2) of pwm_code are used for the 6 bits PWM generation, which controls the
selected currents sinks directly
If pwm_code bit 7 =0 and bit 6 = 1
Then bits 6:1 of pwm_code are used for the 6 bits PWM generation. This signal controls the selected current
sinks, but the analog current of these sinks is divided by 2
If pwm_code bit 7 and bit 6 = 0
Then bits 5:0 of pwm_code are used for the 6 bits PWM generation. This signal controls the selected current
sinks, but the analog current of these sinks is divided by 4
Figure 24 – PWM Control
pwm_code
7 6 5 4 3 2 1 0
6 bit PWM
to current sink(s)
6 bit PWM
to current sink(s) but analog
currents are divided by 2
0
6 bit PWM
to current sink(s) but analog
currents are divided by 4
0 0



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72


データシート ダウンロード

Go To PDF Page


リンク URL



ALLDATASHEETはお客様のビジネスに役立ちますか?  [ DONATE ] 

Alldatasheetは   |   広告   |   お問い合わせ   |   プライバシーポリシー   |   データシートへのリンク    |   リンク交換   |   メーカーリスト
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com