No.1

No.2

No.3

No.4

Inrush Current

Power Supply Wire

Buzzer Unit：90mA (※1)

Buzzer Unit：250mA (※1)

Less than 90% RH (No Condensation)

Buzzer Unit ： 0.3W

Body Unit ： 0.1W

-20℃ ～ +50℃

Signal Wire Current

（

Per Unit）

LR5-□01□□□W

LED Unit ： 1.1W

Buzzer Unit ： 1.2W (※1)

LED Unit ： none

12V DC

Rated Voltage ±10%

LED Unit：90mA

LED Unit：100mA

Buzzer Unit：none (Not exceeding Maximum Signal Wire Current Ratings) (※2)

Operating Voltage Range

SPECIFICATIONS

Signal Wire

LED Unit：none (※2)

LED Unit ： 1W

1.General Specifications

Rated Voltage

Model

0.7A / Less than 15ms

Typ.

Typ.

Max.

EnvironmentalCondition

Operating Ambient Humidity

Max.

Mounting Direction

Standby Power Consumption

Mounting Location

Rated Power

Consumption

（

Per Unit）

Operating Ambient Temperature

Less than 90% RH (No Condensation)

-30℃ ～ +60℃

Buzzer Unit ： 1.1W (※1)

Indoor Only

Storage Ambient Temperature

Storage Ambient Humidity

More than 1MΩ at 500VDC between live part and non-current carrying metallic part

60±2 Flashes Per Minute

Protection Rating

IP65(IEC 60529)(※3) / NEMA TYPE 4X,13

Upright

Upright

LR-501-

W18F-2_10

Setting

Insulation Resistance

Buzzer Sound

/Typical Frequency

Rapid intermittent beep / 3378Hz

500VAC applied for 1min Between live part and non-current carrying metallic part

without breaking insulation

Flashing Rate

EMC Directive (EN 61000-6-4, EN 61000-6-2)

FCC Part 15 Subpart B Class A

UL 508, CSA-C22.2 No. 14

UL Recognized Component (File No.E215660)

(※1)Environmental Condition ：Buzzer sound No.2　Continuous beep sound

Due to the characteristics of the LED elements, a variation in difference of the color tone

and brightness of every product may occur

(※3)LJ Type IP54

(※2)When (Gray) power supply wire is not connected, inrush current of 0.7A will flow

through the signal wires.

Remarks

Conforms to the CE Requirements

Conforms to the UKCA Requirements

Refer to the 3.Outer Dimensions

Conformity Standards

Withstand Voltage

Depending on DIP Switch Settings

Refer to the 6.Buzzer Pattern Set-up

Rapid Hi-Lo / 2016Hz&3012Hz

Sweep sound / 1000Hz-4032Hz

KC (KN 61000-6-4, KN 61000-6-2)

RoHS Directive (EN IEC 63000)

Outer Dimensions

Continuous beep sound / 3378Hz

2/10