2023/10/12 10:49

Dual-Channel DC Motor Driver-12A Wiki - DFRobo

https://wiki.dfrobot.com/Dual_Channel_DC_Motor_Driver_12A_SKU_DFR0601

2/13

Usethis dual channel DC motor driver together with Arduino controller to easily realize motor controlling. The module can be applied to

automatic robot, mechatronic, equipment manufacture, scientific production, electronics competition and so on.

Specification

Motor Channel: 2

Input Voltage: 6.5-37V DC

Signal Control Voltage: 3V-5V compatible

Signal Control Current: 15mA (at 5V signal control voltage)

PWM Input Frequency: 18-60KHz

Minimum Pulse Width: 2us

Peak Current: 70A(100ms), the current will be limited as the temperature increases.

Continuous Current: each channel can output 12A current continuously

Operating Temperature: -25-85℃

Overheat Temperature: 85℃-95℃

Over-voltage: 37.5V

Under-voltage: 6.3V

Dimension: 50mm×50mmx12.5mm/1.97”×1.97”×0.49”

Built-in over-voltage, under-voltage and overheat protection circuit, onboard STATE indicator to show the present work state.