Step-Down (230VAC to 115VAC) 175 Series

Plug-In

Features

Single winding, does not provide isolation, for use where equipment is

already isolated and only voltage change is required.

World wide applications, 50 or 60 Hz. operation, step down (230VAC to 115

VAC).

Input is circuit breaker protected.

Hi-pot tested to 2 KV RMS.

Input is a standard 250V North American, 3-wire, grounded plug (can also

be used with adaptors for proper grounding).

Input on "-NA" version - connected to a 5 foot cord & grounded North

American 250V plug (NEMA 6-15P).

Output connected to a one foot long "pig tail" cord with standard North

American 115V - 3 wire grounded receptacle (NEMA 5-15R).

North American Mark of Safety - C UL & UL listed (File #E211544).

Indoor use only.

Remember - These units do NOT convert line frequency.

Gallery

Quality Products. Service Excellence.