www.panduit.com/ia

specifications

Industrial patch cords shall be constructed of Category 5e, industrial grade,

24 AWG stranded, twisted 4-pair shielded SF/UTP cable with a flame

retardant (CM) thermoplastic elastomer (TPE) jacket. Patch cord cable shall

be offered in multiple colors and lengths for design flexibility. Each patch cord

shall be pre-terminated to include Category 5e RJ45 shielded modular plugs

on each end, with a black strain relief boot, and wired according to the T568A

standard. Each patch cord is designed to support high-flex applications and

is rated for 600 V panel or on-machine applications when the space is shared

with high voltage power cables.

IndustrialNet™ Category 5e Shielded

600 V-Rated Patch Cords

SPECIFICATION SHEET

applications

technical information

Electrical/

mechanical performance:

Exceeds channel and component requirements of

ANSI/TIA-568-C.2 Category 5e and ISO 11801 Class D

standards at swept frequencies up to 100MHz; meets ODVA

Ethernet/IP electrical and mechanical performance requirements

FCC and ANSI

compliance:

Meets all applicable ANSI/TIA-968-A requirements; contacts plated with 50

microinches of gold for superior performance

IEC compliance:

Meets IEC 60603-7

UL-rated:

UL 1863 approved

IP compliance:

Rated IP20

RoHS compliancy status:

Compliant

PoE compliance:

Meets IEEE 802.3af and IEEE 802.3at for PoE applications

Other

standard compliances:

UL AWM Style 2463 (80°C 600 V)

Flex Life Test: 1 million cycles at 10x cable diameter; 10 million cycles at

20x cable diameter

Torsion Life Test: 3 million cycles, 360°

Temperature rating:

-20°C to 70°C (-4°F to 158°F) operating

-40°C to 70°C (-40°F to 158°F) storage

Wiring scheme:

T568A

Cable jacket diameter:

7.2mm (0.285 in.) nominal

Flame rating:

CM (UL1685)

Packaging:

1 unit per polyethylene bag, 10 units per carton

key features and benefits

Robust

600V-rated construction

Allows for patch runs between automation devices in industrial environments;

rated for 600 V panel or on-machine applications when the space is shared

with high voltage power cables; plug contact plated with 50 microinches of gold

100% performance tested

for wire map, NEXT, and

return loss

Confidence that each patch cord delivers specified performance

Centered

de-embedded plug

Performs in center of ANSI/TIA-568-C.2 component range,

ensuring interoperability and optimum performance

Integral pair manager

Optimizes performance and consistency by reducing untwist

at the plug

Flexible stranded cable

24 AWG stranded copper cable with a nominal diameter of

7.2mm (0.285 in.) allows for high density applications and superior panel

cable management

Identification provides

Identification of performance level, length, and quality control number for

future traceability

IndustrialNet™ Patch Cords provide an ideal solution to

support Industrial Ethernet from the Local Area

Network (LAN) based support offices to the

processing devices on the plant floor. The industrial

Ethernet patch cord is a key component to an overall

industrial Ethernet application. The patch cord will be

the interface that protects the integrity of the Ethernet

data transfer from the switch or PLC out to the devices

or up to the horizontal plant backbone. The patch cord

incorporates a durable oil and UV resistant TPE

jacketed cable with modular plugs and is fully shielded

for use in high noise (EMI/RFI) environments.

Key applications include:

• 10BASE-T (Ethernet)

• 100BASE-T (Fast Ethernet)

• 1000BASE-T (Gigabit Ethernet)

• Industrial Ethernet

• Ethernet/IP

• Control Panel deployments featuring power

source voltages

• Uplinks featuring gigabit data transmission

from the control panel to the consolidation point

• High flex applications – Robotic, C-Track

IndustrialNet ™ Category 5e Shielded

600 V-Rated Patch Cords

CM/CMX

:

*ISTPHCH1MTL

IndustrialNet ™ Category 5e SF/UTP

Copper Cable

CM/CMX

2-pair:

ISFCH5C02A**-XG

4-pair:

ISFCH5C04A**-XG

IndustrialNet ™ Category 6/5e RJ45

Field Terminable Plug

Field

terminable plug:

ISPS688FA

IndustrialNet ™ M12 D-Code Field

Terminable Plug

Field

terminable plug:

ISPS5E44MFA

IndustrialNet ™ M12 D-Code to RJ45

Panel Mount Adapter

Panel

mount adapter:

ICAM12DRJS

Mini-Com ® Modular Patch Panel

8-port:

CDPP8RG

DIN Rail Adapter

1-port:

CADIN1IW***

*For other lengths, change the length

designation (1M) of the part number to the

desired length (0.3M, 0.6M, 1.5M, 2M, 2.5M,

3M, 3.5M, 4M, 4.5M, 5M, 10M, 15M, or 20M);

to designate color, replace TL (Teal) suffix with

BL (Black), RD (Red), BU (Blue), GY (Gray), or

YL (Yellow). For example, the part number for a

2-meter teal patch cord is ISTPHCH2MTL.

**To designate color, add suffix TL (Teal),

BL (Black), RD (Red), BU (Blue), GY (Gray),

or YL (Yellow).

***For standard colors other than Off White,

replace IW in part number with BL (Black),

EI (Electric Ivory), IG (International Gray), or

WH (White).