4

Raspberry Pi Pico 2 series – Raspberry Pi Ltd

Physical specification

Pico 2

Pico 2 W

WARNINGS

•

Any external power supply used with Raspberry Pi Pico devices shall comply with relevant regulations and standards

applicable in the country of intended use and be a limited power source or PS2 power source per IEC 62368-1.

•

The connection of incompatible devices to Raspberry Pi Pico devices may affect compliance, result in damage to the

unit, and invalidate the warranty.

•

All accessories used with this product should comply with relevant standards for the country of use and be marked

accordingly to ensure that safety and performance requirements are met.

•

The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant

safety requirements are met.

SAFETY INSTRUCTIONS

To avoid malfunction or damage to this product, please observe the following:

•

Do not expose to water or moisture, or place on a conductive surface whilst in operation.

•

Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.

•

Whilst it is powered, avoid handling the printed circuit board, or only handle it by the corners to minimise the risk of

electrostatic discharge damage.

21

11.4

8

1.3 (typ)

5.7

3.8

4.8

1.61

17.78

Note: all dimensions in mm

51

2

2.54

2.4 1.6

1.6

48.26

1

2.1

1

21

11.4

8

1.3 (typ)

3

1.61

4.4

17.78

51

2

2.54

1.6

8

48.26

1

2.1

1

Note:

All dimensions in mm

All dimensions are approximate and for

reference purposes only. The dimensions

shown should not be used for producing

production data

The dimensions are subject to part and

manufacturing tolerances

Dimensions may be subject to change