4/2/2019

Water-Tight ABS & Polycarbonate Enclosures (RZ Series) - Hammond Mfg.

https://www.hammfg.com/electronics/small-case/plastic/rz

1/2

Beige ABS plastic

Beige ABS plastic

with clear

polycarbonate lid

Light gray

polycarbonate

Light gray

polycabonate with

clear polycarbonate

lid

Enclosure is

assembled with

stainless steel

screws into stainless

steel inserts. Wall

Mounting holes are

outside the gaskets

perimeter.

Internal mounting

points designed for

printed circuit boards

or DIN rail

Water-Tight ABS & Polycarbonate Enclosures RZ Series

Opaque or Clear Lid, Smooth Surface

Key Features

Designed to meet IP65.

Ideally suited for mounting printed circuit boards or DIN rail mounted components

Gasketed lid with two-piece tongue & groove construction provides protection against

access of oil, dist, and water

Lid screws are self-captivating (lid holes are threaded with first installation of screws.)

All sizes are available with clear polycarbonate lid (part numbers ending in "C")

Easy to wall-mount using "through box-blind hole construction" whereby the wall-

mounting holes are outside the gasket perimeter.

ABS Plastic Specifications

Suggested for indoor use

UL Flammability rating of UL-94HB

Color: RAL1013

Temperature: -30 degrees C to +80 degrees C.

Polycarbonate Specifications

Suggested for outdoor use

UL Flammability rating of UL-94HB

Color: RAL7035

Temperature: -40 degrees C to +130 degrees C.

Available In Four Styles

Quality Products. Service Excellence.