 |
データシートサーチシステム |
|
|
データシートサーチシステム |
|
ST52T410 データシート(PDF) 33 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST52T410 データシート(HTML) 33 Page - STMicroelectronics |
|
|
33 / 84 page  ST52T410/ST52T420/E420 33/84 4.6 Interrupts and Low power mode All interrupts allow the processor to leave the WAIT low power mode. Only the external Interrupt allows the processor to leave the HALT low power mode. 4.7 Interrupt RESET An eventually pending interrupt can be reset with the instruction RINT j, which resets the interrupt j-th where j identifies the peripherals as described in thefollowing table(seeTable4.4). The assembler instruction: RINT 2 Resets the PWM/Timer 1 interrupt. Note: The RINT command must be preceded from a UDGI (or MDGI) command and followed by a UEGI (or MEGI) command. WARNING: If an interrupt is reset, with the RINT instruction within its own interrupt routine, the priority level of the interrupt becomes the lowest and the routine can be immediately interrupted by a lower priority interrupt request. |
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか？ [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Japanese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
