STR910FAW32 datasheet(73/101 Pages) STMICROELECTRONICS

部品番号	STR910FAW32

部品情報	ARM966E-S??16/32-Bit Flash MCU with Ethernet, USB, CAN, AC motor control, 4 timers, ADC, RTC, DMA

PDF	101 Pages

Scroll/Zoom	100%

メーカー	STMICROELECTRONICS [STMicroelectronics]

ホームページ	http://www.st.com

Logo

73 / 101 page

STR91xFAx3x, STR91xFAx4x

Electrical characteristics

73/101

The software flowchart must include the management of runaway conditions such as:

●

Corrupted program counter

●

Unexpected reset

●

Critical Data corruption (control registers...)

Prequalification trials:

Most of the common failures (unexpected reset and program counter corruption) can be

reproduced by manually forcing a low state on the RESET pin or the Oscillator pins for 1

second.

To complete these trials, ESD stress can be applied directly on the device, over the range of

specification values. When unexpected behavior is detected, the software can be hardened

to prevent unrecoverable errors occurring (see application note AN1015).

7.9.7

Electrical sensitivity

Table 30.

Static latch-up data

Symbol

Parameter

Conditions

Class (1)

Class description: A Class is an STMicroelectronics internal specification. All its limits are higher than the

JEDEC specifications, that means when a device belongs to Class A it exceeds the JEDEC standard. B

Class strictly covers all the JEDEC criteria (international standard).

Static latch-up class

TA=+25°C conforming to JESD78A

II class A

STR910FAW32 データシート(PDF) 73 Page - STMicroelectronics