ST92163 datasheet(79/224 Pages) STMICROELECTRONICS

79 / 224 page

79/224

ST92163 - RESET AND CLOCK CONTROL UNIT (RCCU)

CLOCK MANAGEMENT (Cont’d)

5.3.4 Low Power Modes

The user can select an automatic slowdown of

clock frequency during Wait for Interrupt opera-

tion, thus idling in low power mode while waiting

for an interrupt. In WFI operation the clock to the

CPU core (CPUCLK) is stopped, thus suspending

program execution, while the clock to the peripher-

als (INTCLK) may be programmed as described in

the following paragraphs. An example of Low

Power operation in WFI is illustrated in Figure 38.

If low power operation during WFI is disabled

(LPOWFI bit = 0 in the CLKCTL Register), the

CPU CLK is stopped but INTCLK is unchanged.

If low power operation during Wait for Interrupt is

enabled (LPOWFI bit = 1 in the CLKCTL Register),

as soon as the CPU executes the WFI instruction,

the PLL is turned off and the system clock will be

forced to CLOCK2 divided by 16, or to CK_AF, if

this has been selected by setting WFI_CKSEL,

and providing CKAF_ST is set, thus indicating that

the internal RC oscillator is selected.

If the external clock source is used, the crystal os-

cillator may be stopped by setting the XTSTOP bit,

providing that the CK_AK clock is present and se-

lected, indicated by CKAF_ST being set. The crys-

tal oscillator will be stopped automatically on en-

tering WFI if the WFI_CKSEL bit has been set. It

should be noted that selecting a non-existent

CK_AF clock source is impossible, since such a

selection requires that the auxiliary clock source

be actually present and selected. In no event can

a non-existent clock source be selected inadvert-

ently.

It is up to the user program to switch back to a fast-

er clock on the occurrence of an interrupt, taking

care to respect the oscillator and PLL stabilisation

delays, as appropriate.It should be noted that any

of the low power modes may also be selected ex-

plicitly by the user program even when not in Wait

for Interrupt mode, by setting the appropriate bits.

5.3.5 Interrupt Generation

System clock selection modifies the CLKCTL and

CLK_FLAG registers.

The clock control unit generates an external inter-

rupt request when CK_AF and CLOCK2/16 are

selected or deselected as system clock source, as

well as when the system clock restarts after a

hardware stop (when the STOP MODE feature is

available on the specific device). This interrupt can

be masked by resetting the INT_SEL bit in the

CLKCTL register. In the RCCU the interrupt is

generated with a high to low transition (see inter-

rupt and DMA chapters for further information).

Table 13. Summary of Operating Modes using main Crystal Controlled Oscillator

MODE

INTCLK

CPUCLK

DIV2

PRS0-2

CSU_CKSEL

MX0-1

DX2-0

LPOWFI

XT_DIV16

PLL x BY 14

XTAL/2

x (14/D)

INTCLK/N

N-1

1 0

D-1

PLL x BY 10

XTAL/2

x (10/D)

INTCLK/N

N-1

0 0

D-1

PLL x BY 8

XTAL/2

x (8/D)

INTCLK/N

N-1

1 1

D-1

PLL x BY 6

XTAL/2

x (6/D)

INTCLK/N

N-1

0 1

D-1

SLOW 1

XTAL/2

INTCLK/N

N-1

111

SLOW 2

XTAL/32

INTCLK/N

N-1

WAIT FOR

INTERRUPT

If LPOWFI=0, no changes occur on INTCLK, but CPUCLK is stopped anyway.

LOW POWER

WAIT FOR

INTERRUPT

XTAL/32

STOP

RESET

XTAL/2

INTCLK

111

EXAMPLE

XTAL=4.4 MHz

2.2*10/2

= 11MHz

11MHz

001

ST92163 データシート(PDF) 79 Page - STMicroelectronics

ST92163 データシート(HTML) 79 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシートダウンロード

リンク URL

ST92163 データシート(PDF) 79 Page - STMicroelectronics

ST92163 データシート(HTML) 79 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

データシート ダウンロード

リンク URL

データシートダウンロード