Published Date : FEB 27,2008

Drawing No : SDSA6421

V1

Checked : B.L.LIU

P.3/4

Part Number:

ZSG94W

5.6X1.4mm RIGHT ANGLE SMD CHIP LED LAMP

www.SunLED.com

Remarks:

If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength),

the typical accuracy of the sorting process is as follows:

1. Wavelength: +/-1nm

2. Luminous intensity/ luminous flux: +/-15%

3. Forward Voltage: +/-0.1V

Note: Accuracy may depend on the sorting parameters.

Recommended Soldering Pattern

(Units: mm ; Tolerance: ± 0.1)

Tape Specification (Units : mm)

The device has a single mounting surface. The device

must be mounted according to the specifications.

yalin

數位簽署者：yalin

DN：cn=yalin, o, ou,

email=sjhou@cn.

kingbright.com, c=<無>

日期︰2008.03.08

14:19:18 +08'00'