L5983TR datasheet(15/37 Pages) STMICROELECTRONICS

15 / 37 page

Application information

L5983

15/37

5.2

Inductor selection

The inductance value fixes the current ripple flowing through the output capacitor. So the

minimum inductance value in order to have the expected current ripple has to be selected.

The rule to fix the current ripple value is to have a ripple at 20 %-40 % of the output current.

The inductance value can be calculated by the following equation:

Equation 6

Where TON is the conduction time of the internal high side switch and TOFF is the conduction

time of the external diode (in CCM, FSW = 1 / (TON + TOFF)) the maximum current ripple, at

fixed Vout, is obtained at maximum TOFF that is at minimum duty cycle (see previous section

to calculate minimum duty). So fixing

ΔI

L = 20 % to 40 % of the maximum output current, the

minimum inductance value can be calculated:

Equation 7

where FSW is the switching frequency, 1/(TON + TOFF).

For example for VOUT = 3.3 V, VIN = 12 V, IO = 1.5 A and FSW = 250 kHz the minimum

inductance value to have

ΔI

L = 30 % of IO is about 21 μH.

The peak current through the inductor is given by:

Equation 8

So if the inductor value decreases, the peak current (that has to be lower than the current

limit of the device) increases. The higher is the inductor value, the higher is the average

output current that can be delivered, without reaching the current limit.

In the table below some inductor part numbers are listed.

Table 7.

Inductors

Manufacturer

Series

Inductor value (

μH)

Saturation current (A)

Wurth

3.3 to 6.8

2.75 to 4.2

Coilcraft

MSS1038

15 to 18

3.2 to 3.6

MSS7341

3.3 to 6.2

2.5 to 3.5

Coiltronics

CD1

15 to 22

2.9 to 3.6

UP2.8B

4.7 to 10

2.7 to 3.9

HM76-3

15 to 33

2.5 to 3.7

SUMIDA

CDRH8D28

4.7 to 10

2.5 to 3.4

CDRH8D28/HP

15 to 22

2.5 to 2.8

ΔI

OUT

–

------------------------------ T

⋅

OUT

-------------- T

OFF

⋅

MIN

OUT

ΔI

MAX

----------------------------

MIN

–

-----------------------

⋅

LPK

ΔI

--------

L5983TR データシート(PDF) 15 Page - STMicroelectronics

L5983TR データシート(HTML) 15 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

データシートダウンロード