MSP

Thick Film Resistor Networks Single-In-Line, Molded SIP;

01, 03, 05 Schematics 6, 8, 9 or 10 Pin "A" Profile

and 6, 8 or 10 Pin "C" Profile

Vishay Dale

Document Number: 31510

For technical questions, contact: ff2aresistors@vishay.com

www.vishay.com

Revision: 28-Jul-06

4

Higher power ratings available. Contact factory.

Single Resistor

03

01 and 05

0.30

- 50

+ 25

+ 70

+ 125 + 150

Derating

Ambient Temperature

°C

0.45

1.15

1.50

1.90

MSP06A Package

MSP08A Package

MSP10A Package

“A” Profile

Single Resistor

03

01 and 05

0.38

- 50

+ 25

+ 70

+ 125 + 150

Derating

Ambient Temperature

°C

0.60

1.50

2.00

2.50

MSP06C Package

MSP08C Package

MSP10C Package

“C” Profile

3.00

"A" PROFILE + 70 °C PACKAGE RATINGS

MSP10A

1.25 watts

MSP09A

1.12 watts

MSP08A

1.00 watts

MSP06A

0.75 watts

"C" PROFILE + 70 °C PACKAGE RATINGS

MSP10C

1.60 watts

MSP08C

1.30 watts

MSP06C

1.00 watts

PERFORMANCE

TEST

CONDITIONS

MAX.

ΔR (Typical Test Lots)

Power Conditioning

1.5 x rated power, applied 1.5 hours “ON” and 0.5 hour “OFF” for 100 hrs.

± 4 hrs. at + 25 °C ambient temperature

± 0.50 %

ΔR

Thermal Shock

5 cycles between - 65 °C and + 125 °C

± 0.50 %

ΔR

Short Time Overload

2.5 x rated working voltage 5 seconds

± 0.25 %

ΔR

Low Temperature Operation

45 minutes at full rated working voltage at - 65 °C

± 0.25 %

ΔR

Moisture Resistance

240 hrs. with humidity ranging from 80 % RH to 98 % RH

± 0.50 %

ΔR

Resistance to Soldering Heat

Leads immersed in + 260 °C solder to within 1/16" of device body for

10 seconds

± 0.25 %

ΔR

Shock

Total of 18 shocks at 100 G's

± 0.25 %

ΔR

Vibration

12 hours at maximum of 20 G's between 10 and 2000 Hz

± 0.25 %

ΔR

Load Life

1000 hrs. at + 70 °C, rated power applied 1.5 hours “ON”, 0.5 hour

“OFF” for full 1000 hour period. Derated according to the curve.

± 1.00 %

ΔR

Terminal Strength

4.5 pound pull for 30 seconds

± 0.25 %

ΔR

Insulation Resistance

10 000 Megohm (minimum)

-

Dielectric Withstanding Voltage

-