| データシートサーチシステム |
|
WS57C71C-35 データシート(PDF) 2 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
WS57C71C-35 データシート(HTML) 2 Page - STMicroelectronics |
|
2 / 7 page ![]() WS57C71C 2-56 OPERATING RANGE RANGE TEMPERATURE VCC Commercial 0°C to +70°C +5V ± 10% Industrial –40°C to +85°C +5V ± 10% Military –55°C to +125°C +5V ± 10% ABSOLUTE MAXIMUM RATINGS* Storage Temperature............................–65° to + 150°C Voltage on any Pin with Respect to Ground ....................................–0.6V to +7V VPP with Respect to Ground...................–0.6V to + 13V ESD Protection .................................................. >2000V *NOTICE: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect device reliability. PINS CS1/ CS2 CS3 VCC OUTPUTS MODE VPP Read VIL VIH VIL VCC DOUT Output Disable VIH XX VCC High Z Output Disable X VIL XVCC High Z Output Disable X X VIH VCC High Z Program VPP XVIH VCC DIN Program Verify VIL VIH VIL VCC DOUT Program Inhibit VPP VIH VIL VCC DOUT MODE SELECTION NOTES: 1. CMOS inputs: GND ± 0.3V or VCC ± 0.3V. 2. TTL inputs: VIL ≤ 0.8V, VIH ≥ 2.0V. 3. These are absolute voltages with respect to device ground pin and include all overshoots due to system and/or tester noise. Do not attempt to test these values without suitable equipment. DC READ CHARACTERISTICS Over Operating Range. (See Above) SYMBOL PARAMETER TEST CONDITIONS MIN MAX UNITS VIL Input Low Voltage (Note 3) –0.1 0.8 V VIH Input High Voltage (Note 3) 2.0 VCC + 0.3 V VOL Output Low Voltage IOL = 16 mA 0.4 V VOH Output High Voltage IOH = –4 mA 2.4 V VCC = 5.5 V, f = 0 MHz (Note 1), Comm'l 30 mA ICC1 VCC Active Current Output Not Loaded Industrial 35 mA (CMOS) Add 3 mA/MHz for AC Operation Military 35 mA VCC = 5.5 V, f = 0 MHz (Note 2), Comm'l 50 mA ICC2 VCC Active Current Output Not Loaded Industrial 60 mA (TTL) Add 3 mA/MHz for AC Operation Military 60 mA ILI Input Leakage Current VIN = 5.5V or Gnd –10 10 µA ILO Output Leakage Current VOUT = 5.5 V or Gnd –10 10 µA |
|
|
リンク URL |
| ALLDATASHEETはお客様のビジネスに役立ちますか? [ DONATE ] |
Alldatasheetは | 広告 | お問い合わせ | プライバシーポリシー | データシートへのリンク | リンク交換 | メーカーリスト All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |