V23836-C18-R363 Product Specification – October 2006

© Finisar Corporation October 2006 Rev. A Preliminary Data

10

Application Notes

ATM transceivers and matching circuits are high frequency components and shall be

terminated as recommended in the application notes for proper EMI performance.

Electromagnetic emission may be caused by these components.

To prevent emissions it is recommended that cutouts for the fiber connectors be designed

as small as possible.

It is recommended that the Tx plug and the Rx plug be separated with a bar that divides

the duplex SC opening.

Single Mode 155 Mbit/s ATM 1x9 Transceiver, DC/DC PECL Version

Figure 5