ADA4051-2

Rev. 0 | Page 5 of 20

ABSOLUTE MAXIMUM RATINGS

Table 4.

Parameter

Rating

Supply Voltage

6 V

Input Voltage

Input Current1

±10 mA

Differential Input Voltage2

Output Short-Circuit Duration to GND

Indefinite

Storage Temperature Range

−65°C to +150°C

Operating Temperature Range

−40°C to +125°C

Junction Temperature Range

−65°C to +150°C

Lead Temperature (Soldering, 60 sec)

300°C

current to 10 mA or less whenever input signals exceed the power supply

rail by 0.3 V.

1.33 kΩ resistors and back-to-back diode-connected N-MOSFETs (with a

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

THERMAL RESISTANCE

its exposed paddle soldered to a pad (if applicable) on a 4-layer

JEDEC standard PC board with zero air flow, unless otherwise

specified.

Table 5. Thermal Resistance

Package Type

Unit

8-Lead MSOP (RM-8)

186

52

°C/W

POWER SEQUENCING

The op amp supplies must be established simultaneously with,

or before, any input signals are applied. If this is not possible,

the input current must be limited to 10 mA.

ESD CAUTION