(F Series)

Parameter

Symbol

Part No. (LTL)

Min.

Typ.

Max.

Unit

Test Condition

1CHJDTNN

65

120

1CHJRTNN

65

140

1CHJETNN

65

180

1CHJFTNN

65

180

1CHJYTNN

65

180

1CHJSTNN

65

180

Luminous

Intensity

Iv

1CHJGTNN

65

180

mcd

Note 1

Note 2

Viewing Angle

2

θ1/2

45

deg

Note 3 (Fig.5)

1CHJDTNN

650

1CHJRTNN

639

1CHJETNN

632

1CHJFTNN

611

1CHJYTNN

595

1CHJSTNN

588

Peak Emission

Wavelength

λP

1CHJGTNN

575

nm

Measurement

@ peak (Fig.1)

1CHJDTNN

639

1CHJRTNN

632

1CHJETNN

624

1CHJFTNN

605

1CHJYTNN

592

1CHJSTNN

587

Dominant

Wavelength

λd

1CHJGTNN

572

Nm

Note 5

1CHJDTNN

20

1CHJRTNN

20

1CHJETNN

20

1CHJFTNN

17

1CHJYTNN

15

1CHJSTNN

15

Spectral Line

Half-Width

∆λ

1CHJGTNN

15

Nm

1CHJDTNN

2.0

2.4

1CHJRTNN

2.0

2.3

1CHJETNN

2.05

2.4

1CHJFTNN

2.05

2.4

1CHJYTNN

2.05

2.4

1CHJSTNN

2.05

2.4

Forward Voltage

1CHJGTNN

2.05

2.4

V

Reverse Current

100

µA

Capacitance

C

40

pF

NOTES:

1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve.

2. Luminous intensity rank classified products support two ranks.

3.

θ 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

4. Iv classification code is marked on each packing bag.

5. The dominant wavelength,

λd is derived from the CIE chromaticity diagram and represents the single wavelength which

defines the color of the device.



#

 !"#