ADM1029ARQZ-R7 datasheet(31/50 Pages) ONSEMI

31 / 50 page

Rev. 1 | Page 31 of 50 | www.onsemi.com

ADM1029

Table X. Register Map (Continued)

Address

Name

Default Value

Description

Remote 2 Temp TRANGE/THYST

51h

This register programs the control range for the Remote 2

temperature control loop. It also defines the amount of tem-

perature hysteresis applied to the loop.

Local Temp High Limit

50h (80°C)

High limit for Local measurement (internal sensor).

Remote 1 Temp High Limit

64h (100°C)

High limit for Remote 1 measurement (D1 Sensor).

Remote 2 Temp High Limit

64h (100°C)

High limit for Remote 2 measurement (D2 Sensor).

Local Temp Low Limit

3Ch (60°C)

Low limit for Local Temp measurement (internal sensor).

Remote 1 Temp Low Limit

46h (70°C)

Low limit for Remote 1 measurement (D1 Sensor).

Remote 2 Temp Low Limit

46h (70°C)

Low limit for Remote 2 measurement (D2 Sensor).

Local Temp Value

00h

Measured value from local temp sensor.

Remote 1 Temp Value

00h

Measured value from D1 Remote Sensor.

Remote 2 Temp Value

00h

Measured value from D2 Remote Sensor.

AIN0 High Limit

FFh

High limit for measurement on analog Channel 0.

AIN1 High Limit

FFh

High limit for measurement on analog Channel 1.

AIN0 Low Limit

00h

Low limit for measurement on analog Channel 0.

AIN1 Low Limit

00h

Low limit for measurement on analog Channel 1.

AIN0 Measured Value

00h

Measured value of analog Channel 0.

AIN1 Measured Value

00h

Measured value of analog Channel 1.

NOTE

Question marks on this and following pages indicate bit settings that depend on the state of certain pins on power-up.

ADM1029ARQZ-R7 データシート(PDF) 31 Page - ON Semiconductor

ADM1029ARQZ-R7 データシート(HTML) 31 Page - ON Semiconductor

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

データシートダウンロード