© National Instruments Corporation

21

NI USB-622x/625x/628x OEM User Guide

2.

At the bottom of this file are the descriptors where Windows looks to

identify the device. Locate the two lines of text that contain in quotes

the descriptors for the device name you are modifying. Change the

descriptor on both lines to the new device name, as shown in Figure 18.

Figure 18. INF File Descriptors Changed to “My Device” (Windows 2000)

3.

Save and close the INF file.

4.

Go to the Windows Device Manager, right-click the OEM device under

Data Acquisition Devices, and select Uninstall.

5.

Power down the OEM device and disconnect the USB cable from

your PC.

Original File

Modified File