Specify DAC

sampling rate

Set tone output

frequency

Press ‘Create and

Save/Run

TSW3100’ to load

data into TSW3100

Specify serial LVDS

as data format

Ensure match on data format with

AFE722x setup (e.g. 2s complement)

Select ‘Load and

Run’ option

Initial EVM Setup and Basic Test Procedure

www.ti.com

The DAC output should show something like this on the spectrum analyzer (example with sample rate =

122.88 MSPS, input tone = 10 MHz).

8

EVM Description

SLOU330

– December 2011

Submit Documentation Feedback

Copyright

© 2011, Texas Instruments Incorporated